メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての7個のガイドに反映されます。

英語
イタリア語

手順 7を翻訳中

手順7
To avoid straining the display cables, don't open the display all the way yet. Open the display to about a 45° angle, and use tweezers to peel off the adhesive between the display and the Force Touch gasket. Thread the adhesive around and behind the display cables to get it off completely.
  • To avoid straining the display cables, don't open the display all the way yet.

  • Open the display to about a 45° angle, and use tweezers to peel off the adhesive between the display and the Force Touch gasket.

  • Thread the adhesive around and behind the display cables to get it off completely.

Per evitare la forzatura dei cavi dello schermo, aspetta ad aprire completamente il display.

Apri il display a un angolo di circa 45° e usa delle pinzette per staccare l'adesivo tra lo schermo e la guarnizione del Force Touch.

Tira l'adesivo attorno e dietro ai cavi del display per toglierlo completamente e premi la guarnizione verso il basso per farla aderire di nuovo al case.

Se la guarnizione del Force Touch si allenta e non rimane attaccata, dovrai sostituire sia l'adesivo sotto la guarnizione sia quello tra la guarnizione e il display.

[* icon_caution] To avoid straining the display cables, don't open the display all the way yet.
[* black] Open the display to about a 45° angle, and use tweezers to peel off the adhesive between the display and the Force Touch gasket.
[* black] Thread the adhesive around and behind the display cables to get it off completely, and press the gasket down to re-adhere to the case.
[* icon_reminder] If the Force Touch gasket itself comes loose and won't stick back down, you should replace both the adhesive underneath the gasket and between the gasket and the display
completely.
[* black] Thread the adhesive around and behind the display cables to get it off completely, and press the gasket down to re-adhere to the case.
[* icon_reminder] If the Force Touch gasket itself comes loose and won't stick back down, you should replace both the adhesive underneath the gasket and between the gasket and the display
completely.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります