メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての7個のガイドに反映されます。

英語
イタリア語

手順 4を翻訳中

手順4
Place the edge of a curved blade into the thin gap between the display and the outer case.  Start at the short side of the display, closest to the digital crown. Press firmly straight down into the gap. Once inserted, tilt the blade to pry the display open slightly.
Pry up the screen
  • Place the edge of a curved blade into the thin gap between the display and the outer case. Start at the short side of the display, closest to the digital crown.

  • Press firmly straight down into the gap.

  • Once inserted, tilt the blade to pry the display open slightly.

  • Do not insert the knife more than 1/16th of an inch (~2 mm).

Infila il bordo di una lama curva nella sottile fessura tra il display e il case esterno. Inizia sul lato corto del display, vicino alla Digital Crown.

Premi fermamente esattamente verso il basso nella fessura.

Una volta inserita la lama, torcila per sollevare lievemente il display.

Fai entrare la lama al massimo di 2 mm circa.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります