メインコンテンツにスキップ

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.
Apply heat
  • Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.

  • Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.

  • You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.

iOpenerを使って、ディスプレイを温め、内部コンポーネントを固定するために使用されている接着剤を柔らかくします。

[*title] Apply heat
[*
black] [guide|11677|Prepare an iOpener|new_window=true],iOpener] (or grab a hair dryer or heat gun) and heat the displayface of the watch until it's slightly too hot to touch.
[* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and
soften the adhesive securingholding it to the case.
[* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry
it in placeoff.
[*title] Apply heat
[*
black] [guide|11677|Prepare an iOpener|new_window=true],iOpener] (or grab a hair dryer or heat gun) and heat the displayface of the watch until it's slightly too hot to touch.
[* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and
soften the adhesive securingholding it to the case.
[* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry
it in placeoff.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります