メインコンテンツにスキップ

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 9を翻訳中

手順9
Use an opening pick to lever out the antenna cable assembly in three separate actions. Do not slide the opening pick from one side to the other because there are two display cables that can be damaged. Insert the opening pick beneath the right side of the antenna cable assembly and lever it out. Pull it out and repeat the procedure in the middle between the two display cables. Repeat once more on the left side of the assembly.
  • Use an opening pick to lever out the antenna cable assembly in three separate actions.

  • Do not slide the opening pick from one side to the other because there are two display cables that can be damaged.

  • Insert the opening pick beneath the right side of the antenna cable assembly and lever it out. Pull it out and repeat the procedure in the middle between the two display cables. Repeat once more on the left side of the assembly.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります