メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 7を翻訳中

手順7
Onto the logic board, which may be the most important of all the internal goodies. It regulates all the aspects of operation and safety for the device. The logic board simply sits on brackets molded into the plastic housing. No screws! Disconnect a couple of spade connectors from it, and slide it out a bit to reach the control panel ribbon cable connector.
  • Onto the logic board, which may be the most important of all the internal goodies. It regulates all the aspects of operation and safety for the device.

  • The logic board simply sits on brackets molded into the plastic housing. No screws!

  • Disconnect a couple of spade connectors from it, and slide it out a bit to reach the control panel ribbon cable connector.

  • Disconnect the control panel ribbon cable from the board. This should almost free the logic board from the rest of the blender.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります