メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 6を翻訳中

手順6
Use the tip of a spudger to gently push the speaker cable connector out of its socket horizontally, alternating pushing either side of the connector out a little bit at a time. Use the tip of a spudger to gently push the speaker cable connector out of its socket horizontally, alternating pushing either side of the connector out a little bit at a time. Use the tip of a spudger to gently push the speaker cable connector out of its socket horizontally, alternating pushing either side of the connector out a little bit at a time.
  • Use the tip of a spudger to gently push the speaker cable connector out of its socket horizontally, alternating pushing either side of the connector out a little bit at a time.

スパッジャーの先端を使って、ソケットからスピーカーケーブルのコネクタ両側を少しずつ交互に押し出します。

[* black] Use the tip of a spudger to gently push the speaker cable connector out of its socketsocket horizontally, alternating pushing either side of the connector out a little bit at a time.
[* black] Use the tip of a spudger to gently push the speaker cable connector out of its socketsocket horizontally, alternating pushing either side of the connector out a little bit at a time.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります