メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。

英語
イタリア語

手順 3を翻訳中

手順3
Insert one corner of an opening pick into the space between the lower case and the chassis. Slide the opening pick around the nearest corner and halfway up the side of the case. This releases the first of the hidden clips securing the lower case to the chassis. You should feel and hear the clip pop free.
Separate the clips
  • Insert one corner of an opening pick into the space between the lower case and the chassis.

  • Slide the opening pick around the nearest corner and halfway up the side of the case.

  • This releases the first of the hidden clips securing the lower case to the chassis. You should feel and hear the clip pop free.

Inserisci un angolo del plettro di apertura nello spazio tra la cover inferiore e lo chassis.

Fai scorrere il plettro di apertura attorno all'angolo più vicino e fino a metà circa del lato del case.

In questo modo si sgancia la prima delle clip nascoste che fissano il case inferiore allo chassis. Dovresti sentire la clip che si apre.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります