メインコンテンツにスキップ
英語
日本語

手順 10を翻訳中

手順10
A series of screws and tightly wrapped antenna cables secure the rear I/O panel shield to the logic board. A few twists of our precision aluminum driver with a T6 Torx bit and some cable de-routing is all it takes to remove the shield. A few twists of our precision aluminum driver with a T6 Torx bit and some cable de-routing is all it takes to remove the shield.
  • A series of screws and tightly wrapped antenna cables secure the rear I/O panel shield to the logic board.

  • A few twists of our precision aluminum driver with a T6 Torx bit and some cable de-routing is all it takes to remove the shield.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります