Skip to main content
英語
日本語

手順 11を翻訳中

Step 11
It's time to switch sides. Remove your book or foam block and place it under the opposite side of your MacBook Pro. Repeat the procedure from the prior steps to separate the two battery cells on this side: Apply your adhesive remover to the elevated edge of the outer battery cell, and wait 2-3 minutes for it to penetrate.
  • It's time to switch sides. Remove your book or foam block and place it under the opposite side of your MacBook Pro.

  • Repeat the procedure from the prior steps to separate the two battery cells on this side:

  • Apply your adhesive remover to the elevated edge of the outer battery cell, and wait 2-3 minutes for it to penetrate.

  • Work one corner of a plastic card underneath the battery cell, and slide the card fully underneath the battery cell to separate it.

  • Do the same for the adjacent cell.

  • Leave your plastic card in place or flip the battery cells over to prevent them from re-adhering during the following steps.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります