メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての14個のガイドに反映されます。

英語
イタリア語

手順 5を翻訳中

手順5
If the EMI shield has any sharp protrusions after removal, you should flatten them before reinstalling the shield. Squeeze the sharp protrusion with a pair of pliers to flatten it. Repeat the process for all sharp protrusions along the edges of the EMI shield.
  • If the EMI shield has any sharp protrusions after removal, you should flatten them before reinstalling the shield.

  • Squeeze the sharp protrusion with a pair of pliers to flatten it.

  • Repeat the process for all sharp protrusions along the edges of the EMI shield.

Se la schermatura EMI ha delle sporgenze appuntite dopo la rimozione, dovresti appiattirle prima di reinstallarla.

Schiaccia le sporgenze con delle pinze per appiattirle.

Ripeti la procedura per ogni sporgenza appuntita lungo i bordi della schermatura EMI.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります