メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての14個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
Use picks to ensure most of the adhesive has been cut through on the top, left, and bottom sides. Twist the top and bottom picks to separate the display assembly from the rear case. Do not attempt to remove the display—it is still attached to the rear case.
Slice through the remaining adhesive
  • Use picks to ensure most of the adhesive has been cut through on the top, left, and bottom sides.

  • Twist the top and bottom picks to separate the display assembly from the rear case.

  • Do not attempt to remove the display—it is still attached to the rear case.

Usa i plettri per assicurarti che la maggior parte dell'adesivo sia stato tagliato lungo i bordi superiore, sinistro ed inferiore.

Torci i plettri sui bordi superiore ed inferiore per separare il gruppo dello schermo dalla scocca.

Non cercare di rimuovere lo schermo: è ancora collegato alla cover posteriore.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります