手順 2を翻訳中
Step 2
-
To test the heating element, use a digital multimeter.
-
Set the multimeter to 200 under ACV.
-
Bring the ends of the multimeter toward the two lead wires.
-
If the circuit between the wires is closed, the numbers on the multimeter should keep changing.
-
If the numbers are not changing, replace the heating element.
-
If the circuit is closed, check the thermal cutout.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。