手順 5を翻訳中
手順5
-
Solder the wires cut wires onto the motor in the location recorded previously.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
The ends of the wires will need to be stripped before soldering.
Be extremely careful not to burn yourself while soldering.
Solder the wires cut wires onto the motor in the location recorded previously.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
次の行
前の行
下に新しい行を挿入
上に新しい行を挿入
現在の行をインデントする
現在の行をインデント解除する
現在の行を削除する
次の手順に移動します。
前の手順に移動します。
ヘルプを開く