メインコンテンツにスキップ
英語
日本語

手順 6を翻訳中

手順6
Lift the two cables with the gold ends connected to the I/O board to disconnect them. Use a Phillips #0 screwdriver to unscrew the two 5mm screws from the right side of the screen base. Use a Phillips #0 screwdriver to unscrew the two 5mm screws from the left side of the screen base.
  • Lift the two cables with the gold ends connected to the I/O board to disconnect them.

  • Use a Phillips #0 screwdriver to unscrew the two 5mm screws from the right side of the screen base.

  • Use a Phillips #0 screwdriver to unscrew the two 5mm screws from the left side of the screen base.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります