メインコンテンツにスキップ
英語
中国語

手順 7を翻訳中

手順7
Two quick flicks disconnect the LCD and digitizer cables, leaving only the battery cable as a final umbilical cord between the two halves of the device. The battery is both adhered to the back of the display assembly and soldered to the logic board.
  • Two quick flicks disconnect the LCD and digitizer cables, leaving only the battery cable as a final umbilical cord between the two halves of the device.

  • The battery is both adhered to the back of the display assembly and soldered to the logic board.

  • Unfortunately, the connivance and cost savings of adhesive come at the cost of repairability.

抖动几下便可断开 LCD 与数字转换线缆的连接。剩下的便是电池线缆——维系 iPod 上下两部分的最后“脐带”。

电池被黏在显示屏的后面,同时也焊在逻辑板上。

很遗憾,廉价的粘合方式和过度的纵容带来了难以维修的后果。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります