メインコンテンツにスキップ
英語
スペイン語

手順 7を翻訳中

手順7
Two quick flicks disconnect the LCD and digitizer cables, leaving only the battery cable as a final umbilical cord between the two halves of the device. The battery is both adhered to the back of the display assembly and soldered to the logic board.
  • Two quick flicks disconnect the LCD and digitizer cables, leaving only the battery cable as a final umbilical cord between the two halves of the device.

  • The battery is both adhered to the back of the display assembly and soldered to the logic board.

  • Unfortunately, the connivance and cost savings of adhesive come at the cost of repairability.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります