メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 23を翻訳中

手順23
Slide the metal plate covered latch component back onto the assembly, making sure to engage that white round plastic portion from the main assembly into the notch in the latch component. Secure the bolt back in through the metal plate and also install the remaining screw on the back side.
Re-attach the latch component
  • Slide the metal plate covered latch component back onto the assembly, making sure to engage that white round plastic portion from the main assembly into the notch in the latch component.

  • Secure the bolt back in through the metal plate and also install the remaining screw on the back side.

  • Re-install the weatherstrip around the latch mechanism edge where it was removed.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります