メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 17を翻訳中

手順17
Remove the plastic cover on the edge of the actuator by slipping a flatblade screwdriver under the lip or lifting up at the lip of the cover where the holes are slipped over the plastic posts. There are posts on both sides of the assembly. There is also a flat plastic cover adjacent to the edge cover.  Go ahead and pop that cover as well.
Disassemble the door lock actuator
  • Remove the plastic cover on the edge of the actuator by slipping a flatblade screwdriver under the lip or lifting up at the lip of the cover where the holes are slipped over the plastic posts.

  • There are posts on both sides of the assembly.

  • There is also a flat plastic cover adjacent to the edge cover. Go ahead and pop that cover as well.

  • Set the plastic covers aside for reassembly.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります