メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 4を翻訳中

手順4
With the exposed adhesive facing down, carefully align the strips into your iPhone's rear case. Position the black tab very close to, but not quite touching, the black plastic speaker housing on the bottom right. Set the adhesive strips into the rear case and allow them to stick.
  • With the exposed adhesive facing down, carefully align the strips into your iPhone's rear case.

  • Position the black tab very close to, but not quite touching, the black plastic speaker housing on the bottom right.

  • Set the adhesive strips into the rear case and allow them to stick.

接着剤が露出した面を下にして、iPhoneのリアケースの内側に慎重に位置決めします。

黒いタブを下部の右にある黒いプラスチック製スピーカーハウジングに触れないながらも、最も近い位置に配置します。

接着ストリップをリアケース内にセットし、接着させます。

[* black] With the exposed adhesive facing ''down'', carefully align the strips into your iPhone's rear case.
[* icon_note] Position the black tab very close to, but not quite touching, the the black plastic speaker housing on the bottom right.
[* icon_note] Position the black tab very close to, but not quite touching, the the black plastic speaker housing on the bottom right.
[* black] Set the adhesive strips into the rear case and allow them to stick.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります