メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
After snapping the eccentric rotating mass (ERM) vibration motor out of its housing on the backside of the display,  we can begin to lift up the motherboard... Only to be snagged by some sneaky display cables! As we deftly maneuver a spudger to unclip the two(two?) display cables from the underside of the motherboard, we realize with great sadness that the battery and the vibration motor are both hanging on by a solder.
  • After snapping the eccentric rotating mass (ERM) vibration motor out of its housing on the backside of the display, we can begin to lift up the motherboard...

  • Only to be snagged by some sneaky display cables!

  • As we deftly maneuver a spudger to unclip the two(two?) display cables from the underside of the motherboard, we realize with great sadness that the battery and the vibration motor are both hanging on by a solder.

  • With the display cables free, we can lift out the motherboard and her soldered-on freeloaders.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります