メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Using your #00 Philips Screwdriver, remove the six screws holding the midframe in place. Remove the four screws at the bottom of the device holding the speaker assembly in place. The screw on the far right may be covered in adhesive. Use your plastic spudger to remove the adhesive covering the screw.
Unscrew the Midframe and Speaker Assemby
  • Using your #00 Philips Screwdriver, remove the six screws holding the midframe in place.

  • Remove the four screws at the bottom of the device holding the speaker assembly in place.

  • The screw on the far right may be covered in adhesive. Use your plastic spudger to remove the adhesive covering the screw.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります