メインコンテンツにスキップ
英語
日本語

手順 7を翻訳中

手順7
This step will require a soldering iron. Now you will have to remove the existing contacts by way of clipping the line of at an appropriate length away from the contacts.
  • This step will require a soldering iron.

  • Now you will have to remove the existing contacts by way of clipping the line of at an appropriate length away from the contacts.

  • Now solder on your new connections on the board.

  • For the connections to the casing, you should be able to remove them with a little force. If you feel like you are using too much force, feel free to use a heat gun to eliminate some adhesive on the casing side of the contact.

  • Finally, adhere the new contacts to the casing with a "super glue" like Krazy glue.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります