Skip to main content
英語
日本語

手順 4を翻訳中

Step 4
Before soldering the black wire onto the motor clean your soldering iron. Do this by tinning it a little bit as you see in pic 1 then wipe it off on the damp sponge. After tinning your soldering iron you want to tin your wire to make sure the threads won't fall apart as shown in pic 2.
Step 4
  • Before soldering the black wire onto the motor clean your soldering iron. Do this by tinning it a little bit as you see in pic 1 then wipe it off on the damp sponge.

  • After tinning your soldering iron you want to tin your wire to make sure the threads won't fall apart as shown in pic 2.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります