手順 5を翻訳中
手順5
Step 5
-
For this step you will need your soldering iron, damp sponge, and solder.
-
If you have a cold joint then you will need the solder sucker, but if the joint is good, meet the wire and the solder at the location of where you want to solder.
-
Now use your soldering iron to melt the solder onto the wire. Let it dry for 10 sec then tug on the wire gently to see if it worked.
-
When you tug on it and it breaks loose, use the solder sucker to remove the old solder from the joint and re-solder it. If you tug and nothing happens you are all good.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。