Skip to main content

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 7を翻訳中

手順7
Make sure the suction cup is firmly attached to the front panel assembly.
Start lifting the front panel assembly
  • Make sure the suction cup is firmly attached to the front panel assembly.

  • While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.

  • Take your time and apply firm, constant force. The screen is a much tighter fit than most devices.

  • With a plastic opening tool, begin to gently pry the rear case down, away from the screen, while you pull up with the suction cup.

  • There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

吸盤カップがしっかりとフロントパネルアセンブリと密着しているか確認してください。

iPhone を片手でしっかりと抑えながら、吸盤カップを本体背面ケースからフロントパネルを丁寧に引き離していきます。

時間をかけてゆっくりと同じ力加減で作業します。この機種は同じiPhoneの中でも特に頑丈に密封されています。

プラスチックの開口ツールを使うと吸盤カップを上に引き上げながらゆっくりと背面ケースを本体から離すことができます。

フロントパネル本体を背面ケースを固定しているクリップが幾つかあります。フロントパネルアセンブリを外すには、吸盤カップとプラスチック開口ツールを両方使う必要があります。

[title] Start lifting the front panel assembly
[* icon_note] Make sure the suction cup is firmly attached to the front panel assembly.
[* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.
[* icon_note] Take your time and apply firm, constant force. The display assemblyscreen is a much tighter fit than most devices.
[* black] With a plastic opening tool, begin to gently pry the rear case down, away from the display assemblyscreen, while you pull up with the suction cup.
[* icon_note] Take your time and apply firm, constant force. The display assemblyscreen is a much tighter fit than most devices.
[* black] With a plastic opening tool, begin to gently pry the rear case down, away from the display assemblyscreen, while you pull up with the suction cup.
[* icon_note] There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります