メインコンテンツにスキップ
英語
日本語

手順 12を翻訳中

手順12
Push up on the trigger pin to remove it. These are ment to be loose fitting for easy teardown. Once pin is out, the hammer will just slide out. The next step is only on series 80 styles. Underneath the hammer is the safety lever that pushes up on the firing pin block in the slide when the trigger is pulled.
  • Push up on the trigger pin to remove it. These are ment to be loose fitting for easy teardown.

  • Once pin is out, the hammer will just slide out.

  • The next step is only on series 80 styles. Underneath the hammer is the safety lever that pushes up on the firing pin block in the slide when the trigger is pulled.

  • Remove safety lever, it will just fall out (tweezers are just for show).

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります