メインコンテンツにスキップ
英語
日本語

手順 6を翻訳中

手順6
Next we will remove the firing pin and extractor from the slide. This is the pin block for the firing pin. Note, this block (and 2 other parts in the receiver are only on series 80 style 1911s, not series 70) Using one brass punch, press down on the firing pin block and with the other punch, press in on the firing pin.
  • Next we will remove the firing pin and extractor from the slide.

  • This is the pin block for the firing pin. Note, this block (and 2 other parts in the receiver are only on series 80 style 1911s, not series 70)

  • Using one brass punch, press down on the firing pin block and with the other punch, press in on the firing pin.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります