メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての11個のガイドに反映されます。

英語
イタリア語

手順 2を翻訳中

手順2
Insert a plastic opening tool between the display and the case starting at the bottom area of your phone. Carefully pry the display with its parts out of the case. Getting the prying tool in  will require some effort, be careful not to slide the tool too much or you might slightly damage the housing.
  • Insert a plastic opening tool between the display and the case starting at the bottom area of your phone.

  • Carefully pry the display with its parts out of the case.

  • Getting the prying tool in will require some effort, be careful not to slide the tool too much or you might slightly damage the housing.

  • After you pried out the bottom end, use the opening tool to open the clamps on both sides.

Inserisci uno strumento di apertura in plastica tra il display e il case iniziando dalla parte inferiore del tuo telefono.

Stacca con delicatezza dal case il display insieme ai suoi componenti.

Dopo aver staccato la parte inferiore, usa lo strumento di apertura per aprire le clip presenti su entrambi i lati.

[* black] Insert a plastic opening tool between the display and the case starting at the bottom area of your phone.
[* black] Carefully pry the display with its parts out of the case.
+ [* icon_note] Getting the prying tool in will require some effort, be careful not to slide the tool too much or you might slightly damage the housing.
[* black] After you pried out the bottom end, use the opening tool to open the clamps on both sides.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります