メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。

英語
日本語

手順 6を翻訳中

手順6
Use the tip of a spudger to gently push the speaker cable connector out of its socket horizontally, alternating pushing either side of the connector out a little bit at a time. Use the tip of a spudger to gently push the speaker cable connector out of its socket horizontally, alternating pushing either side of the connector out a little bit at a time. Use the tip of a spudger to gently push the speaker cable connector out of its socket horizontally, alternating pushing either side of the connector out a little bit at a time.
  • Use the tip of a spudger to gently push the speaker cable connector out of its socket horizontally, alternating pushing either side of the connector out a little bit at a time.

スパッジャーの先端を使って、ソケットからスピーカーケーブルのコネクタ両側を少しずつ交互に押し出します。

[* black] Use the tip of a spudger to gently push the speaker cable connector out of its socketsocket horizontally, alternating pushing either side of the connector out a little bit at a time.
[* black] Use the tip of a spudger to gently push the speaker cable connector out of its socketsocket horizontally, alternating pushing either side of the connector out a little bit at a time.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります