メインコンテンツにスキップ

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
The top edge of the display is secured with both glue and clips. Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port. The clips will break if you use too much force. Work carefully and be patient.
  • The top edge of the display is secured with both glue and clips.

  • Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.

  • The clips will break if you use too much force. Work carefully and be patient.

  • Again, don't insert the pick more than a few millimeters—about the width of the display bezel—or you may damage the front panel sensor array.

  • Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

開口ピックをiPhoneの上部端に向けてスライドします。ディスプレイ下に留められた圧着材を緩めながら進んでください。

開口ピックをディスプレイベゼルより奥まで挿し込まないでください。フロントパネルセンサーアレイにダメージを与えてしまう危険性が潜んでいます。

スクリーンの上部端はディスプレイとリアケースを外しにくいことがあります。必要であれば、複数回に渡って丁寧に圧着材を切り込み、ディスプレイが外れるまで揺らしてください。

[* icon_note] The top edge of the display is secured with both glue and clips.
[*
black] Slide the opening pick underneath the display alongaround the top edgecorner of the iPhone to loosendisplay, while gently pulling or wiggling the lastdisplay '''''down''''' in the direction of the adhesiveLightning port.
[* icon_caution] The clips will break if you use too much force. Work carefully and be patient
.
[* icon_caution] Don'tAgain, don't insert the pick pastmore than a few millimeters—about the width of the display bezel here either. There is potential tobezel—or you may damage the front panel sensor array if you do.
[* icon_note] The top edge of
array.
[* black] Slide
the screen may be difficultpick to separate. If necessary, slice the opposite corner and cut any remaining adhesive repeatedly and gently wigglesecuring the display until it starts to come freedisplay.
[* icon_note] The top edge of the display is secured with both glue and clips.
[*
black] Slide the opening pick underneath the display alongaround the top edgecorner of the iPhone to loosendisplay, while gently pulling or wiggling the lastdisplay '''''down''''' in the direction of the adhesiveLightning port.
[* icon_caution] The clips will break if you use too much force. Work carefully and be patient
.
[* icon_caution] Don'tAgain, don't insert the pick pastmore than a few millimeters—about the width of the display bezel here either. There is potential tobezel—or you may damage the front panel sensor array if you do.
[* icon_note] The top edge of
array.
[* black] Slide
the screen may be difficultpick to separate. If necessary, slice the opposite corner and cut any remaining adhesive repeatedly and gently wigglesecuring the display until it starts to come freedisplay.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります