メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
中国語

手順 17を翻訳中

手順17
We pull another threaded ring out of the HomeBody and finally gain access to snow white and the seven tweeters, complete with their conductive power posts. That's right—those gold screwposts are delivering power to the tweeters.
  • We pull another threaded ring out of the HomeBody and finally gain access to snow white and the seven tweeters, complete with their conductive power posts.

  • That's right—those gold screwposts are delivering power to the tweeters.

  • Taking a look at a port, we've got a very bad feeling about this. Or maybe it's the tweeter that's nervous.

  • The tiny folded horn at the front of the tweeter is a trick that audio design engineers use to increase a speaker's efficiency and control the direction of its sound. It's the same concept used in the gramophone.

  • Time to break out the ultrasonic cutter and pop this unit open!

我们从机身中拉出另一个螺纹环,最后获得白雪公主和七个高频扬声器,并带有导电的电源接线柱。

没错 - 那些金螺柱为高频扬声器供电。

看看这个端口,我们感觉不妙。 或许它是紧张的高频扬声器。

高频扬声器前面的小折叠喇叭是音频设计工程师用来提高扬声器效率并控制其声音方向的一种技巧。 这与留声机中使用的道理相同。

是时候用超声波切割机打开这个单元!

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります