メインコンテンツにスキップ
英語
日本語

手順 6を翻訳中

手順6
Now that the hard part is done, lets see some guts. Use your spudger to release the 2 digitizer ribbon cables from the mainboard. They are located on the left side of the tablet between the micro-HDMI and the microSD slot. Use your spudger to release the LCD cable from the back of the LCD.
  • Now that the hard part is done, lets see some guts.

  • Use your spudger to release the 2 digitizer ribbon cables from the mainboard. They are located on the left side of the tablet between the micro-HDMI and the microSD slot.

  • Use your spudger to release the LCD cable from the back of the LCD.

  • You should now be able to separate the screen assembly from the body of the tablet. Set it aside for later disection.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります