メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
中国語

手順 1を翻訳中

手順1
Be careful not to touch the three rows of grounding pads near the bottom of the iPhone. Remove the seven screws securing the bracket below the Taptic Engine and speaker:
  • Be careful not to touch the three rows of grounding pads near the bottom of the iPhone.

  • Remove the seven screws securing the bracket below the Taptic Engine and speaker:

  • Two Y000 1.9 mm screws

  • One Y000 1.2 mm screw

  • One Y000 1.6 mm screw

  • One Phillips 2.4 mm screw

  • One Phillips 1.7 mm screw

  • One Phillips 1.5 mm screw

移除Taptic Engine和扬声器上方的金属保护罩上的7颗螺丝:

两颗1.9mm Y000型螺丝

一颗1.2mm Y000型螺丝

一颗1.6mm Y000型螺丝

一颗2.4mm 十字螺丝

一颗1.7mm 十字螺丝

一颗1.5mm 十字螺丝

[* icon_caution] Be careful not to touch the three rows of grounding pads near the bottom of the iPhone.
[*
black] Remove the seven screws securing the bracket overbelow the Taptic Engine and speaker:
[* redorange] Two Y000 1.9 mm screws
[* orangeyellow] One Y000 1.2 mm screw
[* yellowgreen] One Y000 1.6 mm screw
[* greenlight_blue] One Phillips 2.4 mm screw
[* light_blueblue] One Phillips 1.7 mm screw
[* blueviolet] One Phillips 1.5 mm screw
[* icon_caution] Be careful not to touch the three rows of grounding pads near the bottom of the iPhone.
[*
black] Remove the seven screws securing the bracket overbelow the Taptic Engine and speaker:
[* redorange] Two Y000 1.9 mm screws
[* orangeyellow] One Y000 1.2 mm screw
[* yellowgreen] One Y000 1.6 mm screw
[* greenlight_blue] One Phillips 2.4 mm screw
[* light_blueblue] One Phillips 1.7 mm screw
[* blueviolet] One Phillips 1.5 mm screw

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります