メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
フランス語

手順 1を翻訳中

手順1
Be careful not to touch the three rows of grounding pads near the bottom of the iPhone. Remove the seven screws securing the bracket below the Taptic Engine and speaker:
  • Be careful not to touch the three rows of grounding pads near the bottom of the iPhone.

  • Remove the seven screws securing the bracket below the Taptic Engine and speaker:

  • Two Y000 1.9 mm screws

  • One Y000 1.2 mm screw

  • One Y000 1.6 mm screw

  • One Phillips 2.4 mm screw

  • One Phillips 1.7 mm screw

  • One Phillips 1.5 mm screw

Retirez les sept vis qui fixent le cache sur le Taptic Engine et le haut-parleur :

Deux vis Y000 de 1,9 mm

Une vis Y000 de 1,2 mm

Une vis Y000 de 1,6 mm

Une vis cruciforme de 2,4 mm

Une vis cruciforme de 1,7 mm

Une vis cruciforme de 1,5 mm

[* icon_caution] Be careful not to touch the three rows of grounding pads near the bottom of the iPhone.
[*
black] Remove the seven screws securing the bracket overbelow the Taptic Engine and speaker:
[* redorange] Two Y000 1.9 mm screws
[* orangeyellow] One Y000 1.2 mm screw
[* yellowgreen] One Y000 1.6 mm screw
[* greenlight_blue] One Phillips 2.4 mm screw
[* light_blueblue] One Phillips 1.7 mm screw
[* blueviolet] One Phillips 1.5 mm screw
[* icon_caution] Be careful not to touch the three rows of grounding pads near the bottom of the iPhone.
[*
black] Remove the seven screws securing the bracket overbelow the Taptic Engine and speaker:
[* redorange] Two Y000 1.9 mm screws
[* orangeyellow] One Y000 1.2 mm screw
[* yellowgreen] One Y000 1.6 mm screw
[* greenlight_blue] One Phillips 2.4 mm screw
[* light_blueblue] One Phillips 1.7 mm screw
[* blueviolet] One Phillips 1.5 mm screw

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります