メインコンテンツにスキップ
英語
日本語

手順 8を翻訳中

手順8
Use an 8 mm bit driver to remove the four hex bolts from around the perimeter of the boiler (only two are shown). Remove the 2 mm hex set screw from the steam valve knob and pull it away from the piping to remove it from the Barista.
  • Use an 8 mm bit driver to remove the four hex bolts from around the perimeter of the boiler (only two are shown).

  • Remove the 2 mm hex set screw from the steam valve knob and pull it away from the piping to remove it from the Barista.

  • At this point, the boiler is free from the Barista and can be removed.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります