メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 4を翻訳中

手順4
Use a wrench to remove the boiler hose from the pressure release valve. Remove the two slotted screws securing the pump brackets to the frame of the Barista. The simple angled rubber pump brackets are designed to absorb vibration from the reciprocating pump.
  • Use a wrench to remove the boiler hose from the pressure release valve.

  • Remove the two slotted screws securing the pump brackets to the frame of the Barista.

  • The simple angled rubber pump brackets are designed to absorb vibration from the reciprocating pump.

  • Disconnect the two female AC power spade connectors from the pump and slip the thermal fuse out from its holder on the body of the pump.

  • The thermal fuse is a normally closed protective switch that opens the circuit once the pump has reached a critical temperature, thus shutting it down before the coil melts.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります