手順番号3–PowerBook G4 Aluminum 15" 1-1.5 GHz Rear Display Bezel Replacementを翻訳 - iFixit

キャンセル

注意：あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

ガイドに戻る

英語

日本語

前の手順次の手順

手順 3を翻訳中

手順3

The next few steps require the use of plastic opening tools and spudgers that will probably be destroyed in the process. Have a few spares of each tool handy.

Insert a plastic opening tool between the left edge of the front display bezel and the plastic strip attached to the rear bezel, with the edge of the tool angled toward the LCD.

Rotate the tool away from the LCD to pop the rear bezel off the tabs on the front display bezel.

The next few steps require the use of plastic opening tools and spudgers that will probably be destroyed in the process. Have a few spares of each tool handy.
Insert a plastic opening tool between the left edge of the front display bezel and the plastic strip attached to the rear bezel, with the edge of the tool angled toward the LCD.
Rotate the tool away from the LCD to pop the rear bezel off the tabs on the front display bezel.
Work along the left edge of the display until the rear bezel is evenly separated from the front bezel.
Freeing these tabs may require some force. Be sure to support the display assembly with your other hand to avoid putting too much strain on the hinges.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。