メインコンテンツにスキップ
英語
中国語

手順 2を翻訳中

手順2
With a suction handle you can lift the display a little bit to create a gap. Insert just the tip of an opening pick in the gap and steadily slide it along the edge towards the top. You may need to go back and forth a few times. Try to get around the corner and behind the top part of the display. Re-position the suction handle if needed.
  • With a suction handle you can lift the display a little bit to create a gap.

  • Insert just the tip of an opening pick in the gap and steadily slide it along the edge towards the top. You may need to go back and forth a few times.

  • Try to get around the corner and behind the top part of the display. Re-position the suction handle if needed.

  • Leave the opening pick behind the display to avoid the re-sealing of the adhesive.

使用吸盘的手柄,你可以稍微抬起显示屏以形成间隙。

仅将三角撬片的尖端插入间隙中,并沿着边缘朝向顶部稳定地滑动。你可能需要来回滑几次。

试着绕过角落和显示屏的顶部后面。如有需要,重新定位吸盘。

将三角撬片留在显示器后面,以避免重新密封粘合剂。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります