メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
With a suction handle you can lift the display a little bit to create a gap. Insert just the tip of an opening pick in the gap and steadily slide it along the edge towards the top. You may need to go back and forth a few times. Try to get around the corner and behind the top part of the display. Re-position the suction handle if needed.
  • With a suction handle you can lift the display a little bit to create a gap.

  • Insert just the tip of an opening pick in the gap and steadily slide it along the edge towards the top. You may need to go back and forth a few times.

  • Try to get around the corner and behind the top part of the display. Re-position the suction handle if needed.

  • Leave the opening pick behind the display to avoid the re-sealing of the adhesive.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります