メインコンテンツにスキップ
英語
日本語

手順 13を翻訳中

手順13
Use a heat gun to apply heat to the front face of the phone. This will soften the adhesive used to secure the phone's battery.
  • Use a heat gun to apply heat to the front face of the phone. This will soften the adhesive used to secure the phone's battery.

  • When using a heat gun or hair dryer to soften the adhesive, be careful not to overheat the battery. The hair dryer/heat gun will make the phone hot to the touch, so handle the phone with care.

  • Alternatively, you can place a heated iOpener across the top of the battery for approximately three minutes to soften the adhesive holding the battery to the device.

  • If you have multiple iOpeners, it is recommended to also put one on the screen side of the battery.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります