メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 6を翻訳中

手順6
Use a spudger to remove the loudspeaker and the charging port. There is some adhesive underneath and the unit might be a little bit sticky. Use a tweezer to loosen the glued in vibration motor and remove it. If you're having a hard time while removing the loudspeaker or the vibration motor you can use an iOpener to loosen the adhesive and try it again.
  • Use a spudger to remove the loudspeaker and the charging port. There is some adhesive underneath and the unit might be a little bit sticky.

  • Use a tweezer to loosen the glued in vibration motor and remove it.

  • If you're having a hard time while removing the loudspeaker or the vibration motor you can use an iOpener to loosen the adhesive and try it again.

  • Before reassembly check your new part for any components that might need to be transferred from the old one.

  • When reassembling your phone replace old adhesive with double-sided tape or pre-cut adhesive strips.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります