メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 1を翻訳中

手順1
Remove the eight Phillips #00 screws that hold the motherboard in its place. Unplug the antenna cable with a tweezer. After you removed all screws there are still small clamps which hold the motherboard in its place. Don't break them while removing it but press them a little bit to the side to make the removal easier.
  • Remove the eight Phillips #00 screws that hold the motherboard in its place.

  • Unplug the antenna cable with a tweezer.

  • After you removed all screws there are still small clamps which hold the motherboard in its place. Don't break them while removing it but press them a little bit to the side to make the removal easier.

  • Use a spudger to carefully lift up the motherboard including all components holding onto it and remove it.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります