メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての13個のガイドに反映されます。

英語
中国語

手順 5を翻訳中

手順5
Re-insert your tool at the lower right corner of the iPhone, and slide it around the corner and up the right side of the phone to separate the adhesive. Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel. Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel.
  • Re-insert your tool at the lower right corner of the iPhone, and slide it around the corner and up the right side of the phone to separate the adhesive.

  • Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel.

再次插入您的工具在iPhone右下方的边角处,然后滑动其向手机的上方来分离粘合剂。

切勿将撬片插入过深,这样可能会损坏这一侧的iPhone显示线缆。 仅需要插入几毫米或者显示屏边框的深度。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります