メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての51個のガイドに反映されます。

英語
フランス語

手順 2を翻訳中

手順2
Gently bend the Jimmy outwards to pry the crack open a little larger and lift the lower housing up a small amount. There are several plastic clips on the lower housing that fit into a channel in the aluminum top housing. Your goal is to use the Jimmy to push these clips inward enough to free them from the channel, while gently pulling up on the lower housing. There are several plastic clips on the lower housing that fit into a channel in the aluminum top housing. Your goal is to use the Jimmy to push these clips inward enough to free them from the channel, while gently pulling up on the lower housing.
  • Gently bend the Jimmy outwards to pry the crack open a little larger and lift the lower housing up a small amount.

  • There are several plastic clips on the lower housing that fit into a channel in the aluminum top housing. Your goal is to use the Jimmy to push these clips inward enough to free them from the channel, while gently pulling up on the lower housing.

Penchez légèrement la spatule vers l'extérieur pour faire levier et élargir la fente et soulevez légèrement le boîtier inférieur.

Plusieurs clips en plastique sur le boîtier inférieur s’insèrent dans un canal du boîtier supérieur en aluminium. Votre objectif est de pousser ces clips suffisamment avec la spatule vers l’intérieur pour les dégager du canal, tout en tirant doucement le boîtier inférieur vers le haut.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります