メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての14個のガイドに反映されます。

英語
中国語

手順 1を翻訳中

手順1
Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
  • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 3.5 mm pentalobe screws on the bottom edge of the iPhone.

  • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

在您开始之前,请将您的iPhone电池放电至25%以下。 充满电的锂离子电池如果被意外刺破,可能会发生着火和(或)爆炸。

在开始拆卸之前关闭您的iPhone。

打开iPhone的显示屏会破坏屏幕周围的防水封条。 如果您不更换防水封条,您的手机将失去防水功能。

卸下iPhone底部的两个3.5毫米五角螺丝。

[* icon_caution] Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
[* black] Power off your iPhone before beginning disassembly.
[* icon_note] Opening the iPhone's display will damage its waterproof seals. If you do not replace the seals, your phone will no longer be water resistant.
[* red] Remove the two 3.5 mm pentalobe screws on the bottom edge of the iPhone.
[* icon_note] Opening the iPhone's display will compromise its waterproof seals. Have [https://www.ifixit.com/Store/iPhone/IF371-009-1|replacement seals|new_window=true] ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります