メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての14個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
  • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 3.5 mm pentalobe screws on the bottom edge of the iPhone.

  • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

Prima di iniziare, scarica la batteria del tuo iPhone sotto il 25%. Una batteria al litio-ioni carica può prendere fuoco e/o esplodere se viene perforata accidentalmente.

Spegni il tuo iPhone prima di iniziare lo smontaggio.

L'apertura del display dell'iPhone comprometterà le sue tenute impermeabili. Se non sostituirai le guarnizioni, il tuo telefono non sarà più resistente all'acqua.

Rimuovi le due viti Pentalobe da 3,4 mm sul lato inferiore dell'iPhone.

[* icon_caution] Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
[* black] Power off your iPhone before beginning disassembly.
[* icon_note] Opening the iPhone's display will damage its waterproof seals. If you do not replace the seals, your phone will no longer be water resistant.
[* red] Remove the two 3.5 mm pentalobe screws on the bottom edge of the iPhone.
[* icon_note] Opening the iPhone's display will compromise its waterproof seals. Have [https://www.ifixit.com/Store/iPhone/IF371-009-1|replacement seals|new_window=true] ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります