メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての14個のガイドに反映されます。

英語
スペイン語

手順 1を翻訳中

手順1
Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
  • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 3.5 mm pentalobe screws on the bottom edge of the iPhone.

  • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

Antes de comenzar, descarga la batería de tu iPhone por debajo del 25%. Una batería de iones de litio cargada puede incendiarse y / o explotar si se perfora accidentalmente.

Apaga tu iPhone antes de comenzar el desmontaje.

Abrir la pantalla del iPhone dañará sus sellos impermeables. Si no reemplazas los sellos, tu teléfono ya no será resistente al agua.

Retira los dos tornillos pentalobe de 3,5 mm en el borde inferior del iPhone.

[* icon_caution] Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
[* black] Power off your iPhone before beginning disassembly.
[* icon_note] Opening the iPhone's display will damage its waterproof seals. If you do not replace the seals, your phone will no longer be water resistant.
[* red] Remove the two 3.5 mm pentalobe screws on the bottom edge of the iPhone.
[* icon_note] Opening the iPhone's display will compromise its waterproof seals. Have [https://www.ifixit.com/Store/iPhone/IF371-009-1|replacement seals|new_window=true] ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります