ionvac SmartClean V2 Main Brush Replacement - iFixit 修理ガイド

はじめに

This guide will show you how to replace the main brush on your ionvac SmartClean V2. While both the main rolling brush and side spinning brushes sweep all dirt into the dustbin, they are replaced differently. Unlike the side brushes, main brush replacements are not included in your ionvac SmartClean V2 box.

This is a quick and easy replacement, and you will not need any tools to complete it. Remember to remove and reinstall all parts gently.

手順1 Main Brush

ionvac SmartClean V2 Main Brush Replacement, Main Brush: 手順 1、 1の画像 1

Caution: Before beginning, turn off the ionvac and place it on a level surface.
Flip your ionvac upside down so the wheels are pointed upwards and the side brushes are furthest from you.
Place your thumbs on the two release tabs of the main brush cover (brush guard) and push the tabs open.
Remove the brush guard.

手順2

ionvac SmartClean V2 Main Brush Replacement: 手順 2、 2の画像 1

ionvac SmartClean V2 Main Brush Replacement: 手順 2、 2の画像 2

Hold the brush on both ends.
Pull the right side out first, releasing it from the ionvac.
Remove the entire brush from the ionvac.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Ruth Mekonnen

メンバー登録日: 09/11/23

737 ポイント

7のガイドは作成済み

+7 個以上のバッジ

チーム

University of Colorado Denver, Team 1-1, Campeau Fall 2023 University of Colorado Denver, Team 1-1, Campeau Fall 2023人のメンバー

UCDENVER-CAMPEAU-F23S1G1

7 メンバー

11のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 17

今までの合計 142