修理を始めるには コミュニティ ストア

iRobot Roomba Essential Robot Bumper Replacement

はじめに

If your iRobot Roomba Essential Robot is bumping into objects or missing areas while cleaning, the bumper may need to be replaced and the sensors may need to be cleaned. This guide will walk you through removing the bumper and cleaning the sensors, a straightforward process you can do at home using basic tools. Over time, dust and debris can accumulate on the sensors, causing navigation issues and reducing cleaning efficiency. Replacing the bumper and cleaning the sensors will help restore your robot vacuum's ability to navigate accurately.

Symptoms:

  • Robot frequently bumps into objects
  • Missed areas during cleaning

For more information on diagnosing sensor or bumper issues, visit our troubleshooting page.

必要な工具と部品

  1. iRobot Roomba Essential Robot Bumper Replacement, Bumper: 手順 1、 3の画像 1 iRobot Roomba Essential Robot Bumper Replacement, Bumper: 手順 1、 3の画像 2 iRobot Roomba Essential Robot Bumper Replacement, Bumper: 手順 1、 3の画像 3

    • Remove the six screws from the thin edge on the backside of the Roomba using a Phillips #00 screwdriver.

    編集

  3. iRobot Roomba Essential Robot Bumper Replacement: 手順 2、 1の画像 1

    • Separate the bumper from the Roomba.

    編集

  4. iRobot Roomba Essential Robot Bumper Replacement: 手順 3、 2の画像 1 iRobot Roomba Essential Robot Bumper Replacement: 手順 3、 2の画像 2

    • Place your fingers against the white tabs on the side of the Roomba and remove the bumper.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

hannah neuendorf

メンバー登録日: 09/04/24

422 ポイント

3のガイドは作成済み

バッジ: 5

+2 個以上のバッジ

チーム

Utah Tech University, Team 1-7, Crenshaw Fall 2024 Utah Tech University, Team 1-7, Crenshaw Fall 2024人のメンバー

UTAHTECH-CRENSHAW-F24S1G7

3 メンバー

4のガイドは作成済み

0件のガイドコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 7

過去 30 日: 19

今までの合計 272