iRobot Roomba 890 Cleaning Head Replacement

はじめに

During the natural use of an iRobot Roomba, the cleaning head may become worn, or damaged. This guide details the tools and equipment needed to replace an iRobot Roomba 890 cleaning head, as well as the steps required to complete the replacement. These steps reverse after the replacement head is installed, follow the steps in reverse order to reassemble the device.

必要な工具と部品

手順1 Cleaning Head

iRobot Roomba 890 Cleaning Head Replacement, Cleaning Head: 手順 1、 1の画像 1

Use a Phillips #2 screwdriver to remove the two 11 mm screws.
Remove the battery cover.

編集

手順2

Remove the battery by pulling directly up on the grey pull tabs.

編集

手順3

Use a Phillips #2 screwdriver to remove the one 7.7 mm screw.
Remove the yellow brush head.

編集

手順4

iRobot Roomba 890 Cleaning Head Replacement: 手順 4、 3の画像 3

Use a Phillips #2 screwdriver to remove the two 11 mm screws.
Lift the baseplate up and off.

編集

手順5

To remove the dust collection bin, press the release button on the top side of the Roomba and pull it straight out.

編集

手順6

iRobot Roomba 890 Cleaning Head Replacement: 手順 6、 3の画像 3

Press the bright yellow tabs inwards and lift up at the same time to expose the cleaning head.
Remove the main brushes by lifting them up and out of the housing.

編集